пневматические приводы шаровых клапанов: одномоментные и двойные действия

Aug 23, 2024


On this page
 
Pneumatic ball valves are extensively utilized in industrial pipeline systems for the rapid shut-off, distribution, and regulation of fluids. Their performance and reliability largely depend on the type of pneumatic actuator. There are two main types of pneumatic actuators: single-acting and double-acting. Choosing the right pneumatic actuator is crucial for ensuring the effectiveness and safety of the ball valve in various application scenarios. Below is a detailed introduction to these two types of pneumatic actuators, including their definitions, structures, application scenarios, and related information about pneumatic ball valves.

Single-Acting Pneumatic Actuator

 
A single-acting pneumatic actuator is a device used to drive pneumatic ball valves or other pneumatic equipment, with its core feature being the ability to automatically reset with an internal spring in the event of a loss of the air supply. This design makes the single-acting pneumatic actuator particularly important for applications requiring emergency shut-off or automatic recovery functions.

1. Definition and Structure

 
The single-acting pneumatic actuator is equipped with a spring. This design allows the actuator to perform on/off operations when the air supply is normal and to automatically reset with the spring when the air supply fails or the power is cut off. There are two main operating modes for single-acting pneumatic actuators:
 
Normally Open (NO): With the air supply normal, the actuator keeps the valve closed; when the air supply fails, the spring automatically opens the valve. This mode is suitable for applications that require the valve to open automatically in emergency situations, such as pipeline systems handling flammable gases or liquids. The automatic opening of the valve when the air supply fails helps to reduce risks and ensure safety.
 
Normally Closed (NC): With the air supply normal, the actuator keeps the valve open; when the air supply fails, the valve automatically closes. This mode is suitable for applications that require the valve to close automatically when the air supply fails, such as quickly cutting off fluids in dangerous conditions to ensure safety.

2. Application Scenarios

 
Single-acting pneumatic actuators are suitable for applications with high requirements for emergency shut-off. They can automatically revert to a preset state when the air supply fails or power is interrupted, thus ensuring the safety of the system. For example, in critical process control points, single-acting pneumatic actuators can be interlocked with solenoid valves to automatically cut off the pipeline, protecting production equipment from potential safety threats.

Double-Acting Pneumatic Actuator

 
A double-acting pneumatic actuator is a device that controls the opening and closing of valves using the pressure of the air supply. Its characteristic is to maintain the current state when the air supply fails, without an automatic reset function. Compared with single-acting pneumatic actuators, double-acting pneumatic actuators have different advantages and limitations in design and application.

1. Definition and Structure

 
The double-acting pneumatic actuator does not contain a spring internally. It relies on the forward and reverse pressure of the air supply to control the valve's on/off state. When the air supply is normal, the actuator can open or close the valve as needed. However, when the air supply fails, the actuator maintains its current state and does not automatically reset.

2. Application Scenarios

 
Double-acting pneumatic actuators are suitable for application scenarios where the on/off state is not particularly sensitive. For example, in situations where the failure of the air supply will not significantly affect the control system, double-acting pneumatic actuators can work effectively. Since double-acting pneumatic actuators do not have springs, their manufacturing cost is relatively lower, making them more advantageous in cost-sensitive applications.

Structure and Function of Pneumatic Ball Valves

 
The design and structure of pneumatic ball valves directly affect their performance, mainly including the following two types of ball cores.
 
O-Type Ball Core: This ball core is a floating precision casting with a flow channel diameter the same as the pipeline, mainly used as an on/off switch. A O-type ball core is simple in design and suitable for applications requiring rapid on/off operations.
 
V-Type Ball Core: It features a fixed structure with a V-shaped cut on the ball core. By installing a positioner on the actuator, the V-type ball core can achieve proportional regulation of media containing fibers and particulates. This design allows it to handle more complex fluid media and provide more precise control.

1. Single-Acting Pneumatic Ball Valve

 
Single-acting pneumatic ball valves are equipped with a reset spring that automatically resets when there is no compressed air. These valves are particularly suitable for critical process control positions, such as situations requiring automatic recovery to a set state when the air supply fails. For example, single-acting pneumatic ball valves can form an interlocking control system with solenoid valves to achieve emergency pipeline cut-off, ensuring safety and stability in the production process.

2. Double-Acting Pneumatic Ball Valve

 
Double-acting pneumatic ball valves do not have a reset spring and maintain their position when the air supply is disconnected. These valves are suitable for application scenarios where the control on/off state is not highly demanded. When the air supply fails, the valve remains in its current state and does not automatically reset. Therefore, double-acting pneumatic ball valves are suitable for situations where the failure of the air supply will not significantly impact the system.
 
Choosing the right type of pneumatic actuator is crucial for the performance of pneumatic ball valves. Single-acting pneumatic actuators, with their automatic reset function when the air supply fails, are suitable for emergency shut-off applications; while double-acting pneumatic actuators provide reliable on/off control when the air supply is normal but maintain the current state when the air supply fails, making them more suitable for situations where the on/off state is not highly demanded. Based on specific application requirements and cost considerations, selecting the appropriate type of pneumatic actuator can optimize system performance, improve operational safety, and efficiency.
 

Cледующий: Необходимое руководство по очистке и обслуживанию фильтров y

Предыдущий: Триммеры клапанов

Псевдоним*:
E-mail*:
Оценивать*:
Комментарии*:

о авторе
Issac
Issac
О нас
Компания Bosseal Valve, основанная в 2013 году, является профессиональным производителем клапанов в Сучжоу, Китай. В основном мы поставляем промышленные шаровые краны, задвижки, шаровые клапаны, обратные клапаны, поворотные затворы, пробковые клапаны и сетчатые фильтры, разработанные и изготовленные в соответствии со стандартами API, ASME, ISO, DIN, BS, EN.
 
Our Contacts
Building 2, NO.59, Songshan Road, SND, Suzhou, China